High power electrolytic power supply

Features:

1. Bomei Power has developed a new energy-saving and high-efficiency N+1 redundant backup system for high-power electrolysis power supply; under normal circumstances, all module units are involved in the work. Once one of the modules fails, the system automatically withdraws the faulty unit. The modules share the fault unit current, so that the total output voltage and current remain unchanged. At the same time, the faulty module can be taken out for maintenance, the equipment is not stopped, and the full load operation is continued, which greatly improves the reliability of the power supply;

2, high output stability: due to the system response speed [microsecond level], for network power and load changes have a strong adaptability, the output accuracy can be better than 1%.

3, the design of extra large power margin: electronic components and important components have a large margin, which can ensure that customers can fully load and work continuously in 24 hours under various circumstances.

4. High reliability: On the basis of many years of application in many industries, it has experienced continuous innovation and the design concept of the whole machine is leading. The main components are made of high-quality imported components, the core components are made of international patented technology products, the control circuit adopts proprietary technology, and the protection is complete, and the isolation and anti-corrosion measures are excellent.

5, easy to maintain: the circuit uses a computer cable plug-in design. There are main control board, drive board and operation panel; this design and installation of the machine is simpler, more intuitive, more convenient for maintenance and repair. Even the electrician of the user's manufacturer can easily solve the general failure of the machine itself through the technical guidance of our company.

6. The output waveform is easy to adjust: due to the high operating frequency, the output waveform adjustment is relatively low in processing cost, and the waveform can be output more conveniently according to the user's process requirements. This has a strong effect on improving the efficiency of the work site and improving the quality of processed products.

7. Other protection functions include: overcurrent, overvoltage, overtemperature, short circuit, lack of equal fault protection selection, fault lockout and display, etc., ensuring the safety of the system operation and the convenience of maintenance; effectively protecting the power supply itself Can better enhance the service life of the power supply.

8, high-frequency switching power supply configurable features are:

(1), with positive pulse, negative pulse, proportional pulse, interval pulse, counting pulse, timing pulse, program pulse and other functions; (optional)

(2), duty cycle range: 0-100% continuously adjustable, when 100% is pure DC output (optional)

(3), automatic commutation function: that is, the positive pole of the power supply becomes the negative pole, the negative pole becomes the positive pole, and the working time of the forward and reverse can be arbitrarily set (optional)

(4), intelligent: optional standard communication interface RS485 and computer connection to achieve man-machine interface control (optional)

(5), analog signal interface: the user can use 0-5V/10V or 4-20mA signal to control the corresponding parameters of the power supply (optional)

(6), with soft start, timing function, multi-stage control, computer interface, etc. (optional)

Electro-polished deburring industry: The reason why the electro-polishing and deburring industry uses pulse electrolysis power supply is that the ordinary DC power supply cannot polish or deburr the workpiece dead angle. When the high-frequency pulse power supply is used, the pulse off time is beneficial to the surface of the workpiece. There is a process of concentration reduction between the solutions to eliminate concentration polarization and facilitate dead angle polishing. For the processing of workpieces with micropores, the double pulse power supply is generally better. If you have any technical questions, please contact us: 15958882230